Contact us

Soccer equipment and material specialist

News
USER MANUAL: CleatPRO®

USER MANUAL: CleatPRO®

Steam Heating Box for Football Boots

Designed for amateur and professional clubs, the CleatPRO® quickly heats and softens football boots using steam. The boots become more comfortable, adapt better to the shape of the foot, and provide an optimal fit and feel from the very first minutes of play.

Technical Specifications

  • Capacity: Up to 6 pairs of football boots (12 boots)
  • Maximum Shoe Size: EU 51
  • Power Supply: 220 V (Europe) or 110 V (USA/Canada, depending on the model)
  • Dimensions: 61 × 40.5 × 81.5 cm (24 × 15.9 × 32.1 in)
  • Operating Temperature: Adjustable thermostat, factory preset to 74°C (165°F)
  • Construction: Stainless steel with a matte black finish
  • Easy Maintenance: Integrated drain valve

Designed for intensive use, the CleatPRO® meets the demands of both amateur and professional clubs by providing a fast, efficient, and safe way to prepare football boots before training and matches.

Before First Use

1. Prepare the Unit

  • Unpack the CleatPRO® completely.
  • Open the lid.
  • Remove the internal rack.
  • Remove all protective materials from inside the water tank.
  • Rinse the tank if necessary.

  • Ensure that the drain valve is securely closed.

2. Fill the Water Tank

  • Reinstall the internal rack.
  • Pour approximately 8 liters (2.1 US gallons) of water into the tank until the water level is slightly above the top of the rack.

⚠️ Important: The heating element must always remain completely submerged while the unit is operating.

3. Start-Up

  • Plug the unit directly into a 220 V wall outlet (or 110 V for North American models).
  • Do not use an extension cord or power strip.
  • Check that the thermostat is set correctly (74°C / 165°F by default).

  • Turn on the unit approximately 30 minutes before first use to allow it to generate an optimal amount of steam.

Using the CleatPRO®

Heating the Football Boots

  • Once the unit is producing steam:

    1. Place the football boots directly on the rack.
    2. You can stack multiple pairs to make full use of the unit's capacity.
    3. Close the lid securely.

    The recommended heating time is 5 to 30 minutes, depending on the level of softening desired.

Heating the Football Boots

  • Open the lid carefully.
  • Remove the desired pair(s) of boots.
  • Close the lid immediately if other boots are still being heated.


For the best results, put on the boots while they are still warm so they can naturally mold to the shape of your feet.

Daily Inspection

Before each use:

  • Check the water level.
  • Refill the tank if necessary.
  • Ensure that the heating element remains fully submerged.

Cleaning

Never use: Acetone, Solvents, Abrasive or corrosive cleaning products

Safety Instructions

Draining the Water Tank

When the water becomes dirty:

  1. Unplug the unit.
  2. Open the drain valve located at the rear of the unit.
  3. Completely empty the water tank.
  4. Rinse the tank to remove any residue or deposits.
  5. Close the drain valve before refilling the unit.

Safety Guidelines

  • Always use the CleatPRO® on a flat, stable surface.
  • Never operate the unit without water.
  • Never immerse any electrical components in water.
  • Unplug the unit before performing any maintenance or cleaning.
  • Steam is extremely hot. Open the lid carefully to avoid the risk of burns.

  • Keep the unit out of the reach of children while it is in operation.

Usage Tips

✔ Heat your football boots for 10 to 20 minutes before warm-up for maximum comfort and the best fit.

✔ Synthetic boots generally require a shorter heating time than leather boots.

✔ Check the water tank regularly and keep it clean to ensure efficient steam production and extend the lifespan of the CleatPRO®.

group_work Cookie consent
Click For Foot
4.7
Based on 16 reviews
x